Tigerton, WI's Dependable Contractor for Basement Waterproofing & Foundation Repair

Different sections of a failing foundation don't always require the exact same repair. At this Tigerton, WI home, the concrete block basement walls were experiencing inward movement caused by pressure from the surrounding soil. When block walls begin moving, homeowners may notice horizontal cracks along mortar joints, stair-step cracking, bowing, or other signs that the foundation is losing stability.

After evaluating the basement and conditions around the home, Sure-Dry determined that using two different foundation repair systems would provide the appropriate stabilization.

In areas where exterior access allowed, our crew installed GeoLock® Wall Anchors. Steel earth anchors were installed in stable soil away from the foundation and connected to heavy-duty steel plates on the interior basement wall. Once tightened, the system permanently stabilizes the wall against further inward movement.

In other sections of the basement, PowerBrace™ supports were installed. These heavy-duty steel beams are positioned vertically against the block foundation wall and secured to the floor framing above. Because PowerBrace requires no exterior excavation, it can be an effective solution where installing anchors outside the home isn't practical.

Both systems are engineered to stop additional wall movement. Depending on the condition of the foundation, they may also be adjusted over time in an effort to improve the wall's position.

By matching the repair method to the conditions in each part of the basement, Sure-Dry was able to give this Tigerton homeowner a comprehensive foundation stabilization solution designed for long-term protection.

For more foundation repair projects in Tigerton, WI click here.

A large crack in a concrete floor can sometimes tell you more about what's happening underneath the slab than what's happening to the concrete itself.

That was the case at this garage/work shed in Tigerton, WI. The concrete floor had experienced substantial settlement, leaving the homeowner with noticeably uneven slabs and a large crack where sections of the floor had moved apart.

Rather than tearing out the existing floor, Sure-Dry used PolyLevel® to address the loss of support beneath the concrete.

Our concrete repair crew drilled small injection holes through the slab and injected PolyLevel polyurethane beneath the affected areas. The expanding material filled voids below the concrete while allowing the crew to carefully control the lift and bring the settled sections back toward a more level position.

As the floor was lifted, the large crack began to close noticeably. The crack itself wasn't erased, but bringing the slabs back into better alignment reduced the separation that had developed as the floor settled.

PolyLevel is particularly useful for this type of repair because the polyurethane is lightweight, requires much smaller injection holes than traditional mudjacking, and cures quickly. It also fills the underlying voids that contributed to the slab losing support in the first place.

In Wisconsin, changing soil moisture and repeated freeze-thaw cycles can contribute to movement beneath concrete slabs. By filling those voids and lifting the settled sections, Sure-Dry was able to give this Tigerton homeowner a flatter, more stable floor and preserve the existing concrete.

For more concrete lifting and leveling projects in Tigerton, WI click here.

A crawl space doesn't have to be large for failing supports underneath a home to become a structural problem.

At this Tigerton, WI home, Sure-Dry was called to address inadequate support within a relatively small crawl space. When supports beneath floor joists and beams settle, deteriorate, or simply aren't providing enough support, the effects can eventually be noticed in the living space above.

Our crawl space repair crew installed SmartJack® supports beneath the home's structural beam system. SmartJacks are engineered steel columns that can be adjusted during installation to properly support the structure and help stabilize floors above.

Because Wisconsin soils can experience movement from moisture changes and seasonal freeze-thaw conditions, creating dependable support beneath the structure is important. The SmartJack system is designed to transfer structural loads to engineered support below rather than relying on inadequate makeshift posts or unstable soil conditions.

Despite the limited working space, our crew was able to install a permanent support system that helps protect the home's floor structure from continued settlement.

For more crawl space repair projects in Tigerton, WI click here.

A sinking driveway doesn't necessarily mean the concrete itself has failed. Often, the real problem is underneath it.

At this Tigerton, WI home, settlement beneath the driveway had caused concrete slabs to become uneven and cracks to develop. Instead of removing and replacing otherwise usable concrete, the homeowner turned to Sure-Dry for a concrete repair solution.

Our concrete repair crew used PolyLevel® to address the underlying voids and settlement. Small injection holes were drilled through the slabs, and expanding polyurethane was injected beneath the concrete. As the material expanded, it filled empty spaces beneath the driveway while allowing our crew to carefully lift the slabs back toward their proper position.

PolyLevel provides several advantages over traditional mudjacking. The material is lightweight, requires much smaller injection holes, and cures quickly so the repaired concrete can return to service without the lengthy downtime associated with replacement.

After leveling and stabilizing the driveway, NexusPro® was used to seal cracks and joints. Keeping water from freely entering these openings is especially important in Wisconsin, where moisture beneath concrete combined with freezing temperatures can contribute to continued soil movement and slab settlement.

By addressing both the movement of the slabs and the openings that allow water underneath them, Sure-Dry gave this Tigerton homeowner a more complete concrete driveway repair without the disruption of tearing out and replacing the entire driveway.

For more concrete lifting and leveling projects in Tigerton, WI click here.

Recently, a homeowner in Tigerton, WI, reached out to us at Sure-Dry, exhausted by constantly finding their basement swimming in water. No matter how much time they spent cleaning, the water always found its way back in. Understanding the stress and the inconvenience of water damage, our team was eager to provide a long-term, reliable solution. Firstly, we had our Customer Care team set up an appointment for a home inspection, swiftly addressing the homeowner's concern. Our System Design Specialist then took a thorough tour of the home, diagnosing the root cause of the persistent basement flooding. To address this challenge, we recommended installing WaterGuard, a below-floor drain system designed to catch wall and floor joinder leaks, and SuperSump, one of the most efficient sump pumps on the market, guaranteed to keep the basement dry for years to come. Our production team, comprised of skilled foremen, Ryan, and installers, embarked on the project with the commitment to not just install the systems, but to ensure every stage of the process was seamlessly executed. They methodically placed the WaterGuard around the basement's perimeter. Then, they strategically positioned the SuperSump pump, ensuring that any flooding inside the WaterGuard system would promptly be pumped out, far away from the home. After the work, our team made sure to clean up, leaving the basement in better condition than we found it—but most importantly, fully waterproofed. The homeowner's relief was palpable. No longer burdened by the threat of incoming water, they could finally envision a dry, usable space below their home. At Sure-Dry, it’s stories like this that drive us. Knowing we've provided more than just a dry basement, we've delivered peace of mind.

Recently, in the welcoming town of Tigerton, WI, a homeowner reached out to us with a frustrating problem: their garage door wasn't closing properly. Understanding the inconvenience and security risks this could cause, they turned to Sure-Dry for help. Our first step was to listen. After contacting our friendly Customer Care team, we scheduled a home inspection to unearth the root of the issue. Our System Design Specialist, Tim, equipped with knowledge and tools, performed a detailed inspection of the homeowner's garage area. The diagnosis was clear—uneven concrete had compromised the garage door's alignment. Knowing the stress this caused our homeowner, we recommended a straightforward solution: the installation of PolyLevel and NexusPro. PolyLevel aimed to lift and stabilize the concrete, creating a level surface, while NexusPro would seal the joints and cracks, ensuring the fix was not just immediate but lasting. Rolling up our sleeves, our production team got to work. PolyLevel injected beneath the slab was a game-changer, discreetly raising the concrete to its proper position without the mess of traditional mudjacking. Following this, NexusPro brought the sealing prowess, giving the concrete that seamless, water-resistant finish. In the end, not only did we witness the garage door slide shut effortlessly, but we also saw relief and satisfaction in our homeowner’s eyes. Their garage was secure again, and the quick clean-up meant they could enjoy this victory immediately. At Sure-Dry, achieving such solutions with minimal intrusion into our customers' lives, and leaving them with peace of mind, reinforces why we love what we do.