Oakfield, WI's Dependable Contractor for Basement Waterproofing & Foundation Repair

An Oakfield homeowner asked for a permanent solution to a damp, musty crawl space. Our inspection found open soil, wall seepage marks, and vent openings that allowed humid air and pests inside. Insulation was patchy and there was no continuous vapor barrier, so moisture was freely migrating into the home.

We recommended full encapsulation with CleanSpace®. On installation day, the crew:

1. Prepared the area by leveling high spots, removing debris, and addressing minor organic growth on wood with a surface cleaning.

2. Laid drainage matting in low areas to prevent trapped moisture beneath the liner.

3. Installed CleanSpace across the floor and up the perimeter walls, mechanically fastening the liner to the masonry and sealing all seams and penetrations.

4. Sealed foundation vents and the access point to limit outside air and improve energy performance.

5. Completed a walkthrough with the homeowner, confirming a tight seal, easy access for future service, and maintenance guidance.

The result: a dry, encapsulated crawl space that reduces odors and humidity, helps protect framing from moisture, and improves overall home comfort.

Our inspection identified voids beneath multiple panels and deteriorated joint sealant. To correct the issues without tear-out, we recommended a two-step approach: PolyLevel® for lifting and NexusPro® for long-term joint protection.

On installation day, the crew:

1. Mapped lift points and drilled small (≈⅝") injection ports.

2. Injected PolyLevel in controlled increments, monitoring with a laser level to restore drainage away from the garage and entries.

3. Routed and cleaned cracks and control joints, installed backer where needed, and applied NexusPro to create a durable, weather-tolerant seal.

4. Finished by patching injection ports with non-shrink grout and conducting a final walkthrough to confirm smooth transitions and proper pitch.

The homeowner regained level, stable concrete with same-day return to service. With joints sealed by NexusPro®, the repaired slabs now resist water infiltration and the freeze–thaw damage that previously accelerated settlement.

When the Oakfield homeowner called, they described bouncy, uneven floors and interior doors that had begun to stick. Our inspection confirmed the cause in the crawl space: several wood posts were bearing on undersized pads over soft soil, and parts of the main girder were spanning farther than intended. The system had settled gradually, creating deflection and gaps along baseboards.

We proposed the SmartJack® adjustable support system to restore structure without a full rebuild. On install day, the crew:

1. Mapped support points under the main girder and laid out locations to reduce spans and address the worst deflection.

2. Prepared engineered footings—excavated to competent subgrade, placed compacted crushed stone, and set concrete/steel bases to distribute loads and resist future settlement.

3. Set galvanized SmartJack posts and added a supplemental steel beam where needed for continuous bearing.

4. Lifted gradually—using a laser level, we tightened the system in small increments to bring floors back toward their intended elevation while monitoring finishes for stress.

5. Finalized adjustments and documentation—locked hardware, recorded elevations at reference points, and provided a maintenance plan for periodic checks and future fine-tuning if conditions change.

The result was immediate: floor bounce was eliminated, door operation returned to normal, and gaps at baseboards closed. The homeowner now has a stable, code-compliant support system that remains adjustable, protecting the home against future settlement.

A sump pump can be an incredibly valuable resource in your home. When water gets into your basement or crawl space, the sump pump is what protects you from a flood that could cause expensive property damage.

In the case of this home in Oakfield, WI it was their basement that was in need of a system that would drain the water that was finding its way inside from the wet soil surrounding the home's foundation.

To protect this home's crawl space from flooding, Sure-Dry installed SuperSump® Premier Pump System. It is engineered to help keep the basement dry and healthy for extended periods of time, even in times of heavy water intrusion. The SuperSump® includes a powerful Zoeller® ⅓ horsepower cast-iron sump pump, capable of pumping 2,220 gallons of water per hour at an 8-foot head out of your basement. 

To ensure their basement would continue to be protected from water in the event of a power outage, Sure-Dry installed their battery backup UltraSump® system.  The UltraSump® system can pump out in excess of 11,500 gallons of water on a fully charged battery, which is enough water to fill a small swimming pool!

For a free estimate on getting proper sump pump protection for your home, contact Sure-Dry today!