Sure-Dry serving Marinette, WI

During the inspection, a Sure-Dry System Design Specialist evaluated water entry points along the brick foundation, footing conditions, and existing drainage limitations to identify hydrostatic pressure and masonry moisture transmission as the primary issues. Based on these findings, an interior drainage, high-capacity sump system, and dedicated dehumidification solution were recommended.
The installed WaterGuard® Drainage System intercepts groundwater before it reaches the crawlspace floor, the SuperSump® Sump Pumpand UltraSump® battery back-up provide reliable and redundant pumping protection, and the Sedona® SaniDry Dehumidifier maintains optimal humidity levels. Together, these systems deliver long-term waterproofing performance and peace of mind for the Marinette, WI homeowner.

During the crawlspace inspection, a Sure-Dry System Design Specialist evaluated moisture sources, insulation gaps, and air leakage at the rim joists contributing to humidity and temperature loss. Findings confirmed that vapor intrusion and unsealed rim areas were driving the crawlspace issues.
The installed CleanSpace® encapsulation blocks ground moisture, SilverGlo® provides continuous wall insulation, and RimTight® seals and insulates the rim joists. Together, these systems deliver a clean, dry, and energy-efficient crawlspace solution for the Marinette, WI homeowner.

The inspection in Marinette, WI found exposed soil and deteriorating insulation as the primary contributors to moisture intrusion and temperature fluctuations in the crawl space. The System Design Specialist evaluated moisture sources, insulation performance, and air movement, determining that full crawl space encapsulation and wall insulation would provide the most effective long-term solution.

Installation included sealing the dirt floor and crawl space walls with CleanSpace® to block ground moisture and insulating the foundation walls with SilverGlo® to deliver durable, moisture-resistant insulation suited for Wisconsin’s climate. The completed crawl space encapsulation restored a clean, controlled environment and delivered lasting protection and improved comfort for the homeowner.

The inspection in Marinette, WI identified moisture intrusion from exposed soil, air leakage at the rim joists, and insufficient crawl space insulation as the primary contributors to humidity and comfort issues. The System Design Specialist evaluated moisture sources, air pathways, and thermal performance, determining that a full crawl space encapsulation and insulation approach would deliver the most effective long-term solution.

Installation included sealing the crawl space floor and walls with CleanSpace® to block ground moisture, followed by insulating and air sealing the rim joist areas with RimTight® to eliminate drafts and condensation potential. SilverGlo® insulation panels were then installed along the crawl space walls to provide durable thermal resistance and moisture protection suited for Wisconsin’s climate. The completed system created a dry, energy-efficient crawl space and delivered lasting comfort and protection for the homeowner.

The inspection in Marinette, WI identified moisture intrusion from exposed soil, air leakage at the rim joists, and insufficient crawl space insulation as the primary contributors to humidity and comfort issues. The System Design Specialist evaluated moisture sources, air pathways, and thermal performance, determining that a full crawl space encapsulation and insulation approach would deliver the most effective long-term solution.

Installation included sealing the crawl space floor and walls with CleanSpace® to block ground moisture, followed by insulating and air sealing the rim joist areas with RimTight® to eliminate drafts and condensation potential. SilverGlo® insulation panels were then installed along the crawl space walls to provide durable thermal resistance and moisture protection suited for Wisconsin’s climate. The completed system created a dry, energy-efficient crawl space and delivered lasting comfort and protection for the homeowner.

The inspection in Marinette, WI identified groundwater seepage at the crawl space perimeter and elevated humidity as the primary contributors to moisture accumulation and musty conditions. The System Design Specialist evaluated drainage entry points, soil conditions, and moisture levels, determining that a perimeter drainage system paired with reliable pumping and humidity control would provide the most effective long-term solution. WaterGuard® was selected to intercept water before it could spread across the crawl space floor.

Installation included placing WaterGuard® along the crawl space perimeter to capture and channel groundwater to a new UltraSump® system for dependable discharge away from the foundation. A Sedona SaniDry® dehumidifier was then installed to maintain consistent humidity control and protect the crawl space from condensation and moisture-related damage common in northeastern Wisconsin. The completed system delivers long-term crawl space waterproofing, improved air quality, and dependable protection for the homeowner.

The inspection in Marinette, WI revealed a significant void beneath the edge of the concrete driveway caused by soil washout from moisture movement and freeze-thaw conditions. The System Design Specialist assessed slab stability, void depth, and edge support, confirming that void filling and slab stabilization with PolyLevel® was the most effective solution to restore structural support without removing the concrete.

Installation involved injecting PolyLevel beneath the affected driveway edge to completely fill the void and reestablish continuous support under the slab. After confirming stability and proper load distribution, NexusPro® was applied to seal joints and cracks, helping prevent future water intrusion and soil erosion common in northeastern Wisconsin. The completed repair stabilized the driveway edge, reduced the risk of further damage, and delivered a long-lasting concrete repair solution for the homeowner.

The inspection in Marinette, WI confirmed that soil settlement beneath the garage apron was the primary cause of the concrete sinking and separation from the driveway. The System Design Specialist evaluated slab elevation, void conditions, and drainage patterns at the garage entrance, determining that concrete lifting with PolyLevel® was the most effective solution to restore proper grade without removing or replacing the concrete.

During installation, PolyLevel was injected beneath the garage apron to fill underlying voids and achieve controlled, uniform lifting back to the correct elevation. Once alignment and slope were verified, NexusPro® was applied to seal joints and cracks, helping protect the concrete from moisture intrusion and freeze-thaw damage common in northeastern Wisconsin. The completed repair restored safe vehicle access, improved drainage, and delivered a durable concrete leveling solution for the homeowner.

The inspection in Marinette, WI identified soil settlement beneath the concrete driveway, walkway to the front door, and the entry step as the primary cause of the uneven surfaces and slab displacement. The System Design Specialist evaluated slab elevations, void conditions, and the misalignment of the step, determining that concrete lifting with PolyLevel® was the most effective solution to restore proper grade without the need for full concrete replacement.

Installation involved injecting PolyLevel beneath each affected slab and the sunken step to fill underlying voids and achieve controlled, precise lifting. After final elevations and alignment were verified, NexusPro® was applied to seal cracks and joints, protecting the concrete from moisture intrusion and freeze-thaw damage common in northeastern Wisconsin. The completed system eliminated trip hazards, stabilized the concrete surfaces, and delivered a long-lasting concrete leveling solution for the homeowner.

During the on-site inspection, our Sales – System Design Specialist identified soil compression and water migration beneath the front steps and walkway as the root causes of concrete settlement, a frequently encountered issue in the Marinette area where soil conditions and moisture fluctuations can undermine slab support over time. The analysis showed that simply patching cracks wouldn’t address the underlying voids or restore safe elevations.

We recommended a targeted concrete lifting and crack protection solution. Our crew injected PolyLevel® under the settled steps and walkway to lift and stabilize the slabs back to proper grade, eliminating trip hazards and encouraging water to drain away from the entry. Once the slabs were correctly positioned, we sealed all visible cracks and control joints with NexusPro® to help block moisture infiltration and protect soil integrity beneath the surface. The finished result delivered a safer, longer-lasting concrete surface that enhances access and helps prevent future settlement issues

During the inspection, our Sales – System Design Specialist evaluated the cracked and settled concrete around the garage door and beneath the second-level deck, identifying soil compression and moisture movement as the primary causes of settlement, a common issue in Northeast Wisconsin. Special attention was given to drainage patterns and clearance under the deck, where trapped moisture can accelerate concrete and joint failure if not properly addressed. Based on the conditions, concrete lifting and joint sealing were recommended rather than full replacement.

Our installation team injected PolyLevel® beneath the affected slabs to lift and permanently stabilize the concrete, restoring proper slope away from the structure. All cracks and joints were sealed with NexusPro® to help prevent water intrusion and future freeze-thaw damage. The completed repair delivered a durable, cost-effective concrete leveling solution that provides safe access and long-term performance for the homeowner.

During the inspection, our Sales – System Design Specialist evaluated the driveway and identified soil compression beneath several slabs as the cause of the settlement, a common issue in Marinette and throughout Northeast Wisconsin. Drainage patterns were reviewed to ensure water would be directed away from the garage once the concrete was properly leveled. Based on the condition of the driveway, concrete lifting and joint sealing were recommended instead of full replacement.

Our installation team injected PolyLevel® beneath the affected slabs to precisely lift and stabilize the driveway, restoring a smooth, uniform surface across all four parking areas. Cracks and joints were sealed with NexusPro® to protect against moisture infiltration and seasonal movement. The completed repair delivered a durable, cost-effective concrete leveling solution that will perform reliably for years to come.

During the inspection, our Sales – System Design Specialist evaluated the settled garage apron and entry pad and identified soil compression beneath the concrete as the primary cause of movement, a common issue in Northeast Wisconsin. Special attention was given to drainage patterns at the garage and service door, where improper slope can accelerate concrete deterioration and water intrusion. Based on these findings, a concrete lifting and sealing solution was recommended instead of full replacement.

Our installation team injected PolyLevel® beneath the affected slabs to lift and permanently stabilize the concrete, restoring proper pitch away from the structure. Cracks and joints were sealed with NexusPro® to protect against moisture intrusion and freeze-thaw cycles. The completed repair delivered a safe, durable garage apron and entry pad that will perform reliably for years to come.

During the inspection, our Sales – System Design Specialist evaluated the settled sidewalk and wrap-around walkway and identified soil compression beneath the concrete as the primary cause of movement, a common issue in Northeast Wisconsin. Special attention was given to the area near the large picture window, where improper drainage can increase the risk of moisture problems. Based on the conditions observed, a concrete lifting and sealing approach was recommended instead of full replacement.

Our crew injected PolyLevel® beneath the affected slabs to lift and permanently stabilize the concrete, then sealed cracks and joints with NexusPro® to protect against water intrusion and freeze-thaw damage. The completed repair restored safe access to the deck, improved drainage around the home, and delivered a durable concrete leveling solution the homeowner can rely on for lasting performance.

During the inspection, the System Design Specialist assessed slab settlement patterns and used elevation measurements to determine the extent of the sinking. Soil conditions beneath the sidewalk were identified as the primary cause of the movement. Based on slab condition, accessibility, and desired outcome, PolyLevel® was recommended as a minimally invasive and effective repair solution.

Installation involved injecting high-density polyurethane beneath the affected slabs to achieve controlled lift and long-term stabilization. The work was completed efficiently with minimal disruption and immediate usability of the sidewalk.
The homeowner now has a properly supported walkway designed to remain level through Wisconsin’s seasonal weather changes.

During the inspection, the System Design Specialist evaluated the cracking patterns and used elevation checks to confirm uneven support beneath the garage floor. The findings indicated early-stage settlement that could be corrected before more severe damage occurred. Based on slab condition, access, and desired outcome, PolyLevel® was recommended as the most effective solution to stabilize the concrete and prevent continued movement.

Installation involved injecting the polyurethane material beneath the slab to fill voids and restore uniform support across the garage floor. The process was completed efficiently with minimal disruption, allowing normal use of the garage shortly after completion.
The homeowner now has a reinforced garage floor that protects against future settlement and cracking.

During the inspection, the System Design Specialist evaluated slab settlement patterns, crack locations, and drainage flow across the driveway and walkway. Elevation measurements confirmed uneven panels and soil displacement beneath the concrete. Based on slab condition and accessibility, PolyLevel® was recommended to lift and stabilize the concrete while preserving the existing surfaces.

Installation involved injecting high-density polyurethane beneath the affected slabs to achieve precise lift and long-term support. After leveling was complete, NexusPro® was applied to seal cracks and joints, helping block water intrusion and reduce future settlement. The work was completed efficiently with immediate usability.
The homeowner now has restored concrete surfaces that improve safety, function, and curb appeal.

During the inspection, the System Design Specialist identified soil settlement beneath the sidewalk as the cause of the uneven slabs, particularly near the covered patio where moisture and limited evaporation can affect soil stability. Elevation readings were taken to determine the amount of lift required, and access constraints under the roof overhang were evaluated to confirm feasibility. Based on these conditions, PolyLevel® was selected as the most effective and least invasive repair option.

Installation involved injecting high-density polyurethane beneath the settled sidewalk sections to achieve controlled lift and long-term stabilization. The work was completed efficiently with minimal disruption to the surrounding concrete and immediate usability of the walkway.
The homeowner now has a properly supported sidewalk designed to remain level and protected against future settlement.

During the winter evaluation, the System Design Specialist accounted for snow cover by using a level and measurement tools to verify elevation differences and identify settlement patterns at the garage entrance. Despite limited visibility, the data confirmed active slab settlement requiring correction. Based on access, slab condition, and timing, a spring installation plan was developed using PolyLevel® as a minimally invasive solution.

Installation involved injecting high-density polyurethane beneath the garage apron to lift and stabilize the slab with precision. After elevation was restored, NexusPro® was applied to seal joints and cracks, helping block moisture intrusion and protect the base material. The work was completed efficiently with immediate usability of the garage.
The homeowner now has a repaired concrete apron that improves safety, drainage, and long-term durability.

During the inspection, the System Design Specialist identified active groundwater seepage at the foundation perimeter and evaluated drainage pathways, discharge options, and overall basement conditions. The goal was to install a permanent solution that would eliminate water intrusion concerns and present well during buyer inspections. Based on the conditions observed, WaterGuard® was recommended to manage perimeter water intrusion, paired with a SuperSump® to provide dependable pumping capacity.

Installation included placing the interior drainage system around the basement perimeter and integrating it directly into the new sump pump system. The work was completed efficiently with minimal disruption, delivering immediate protection and long-term reliability.
The homeowner now has a waterproofed basement system that supports a smoother home sale process and long-term peace of mind.

During the inspection, the System Design Specialist evaluated floor elevation changes, joist spans, and existing support conditions within the crawl space. Measurements confirmed inadequate support and soil conditions that required a permanent, adjustable solution. Based on these findings, SmartJack® was recommended to stabilize the floor system and address the underlying cause of the sagging floors.

Installation involved preparing reinforced footings, setting the steel support posts, and carefully adjusting them to restore proper beam alignment. The work was completed efficiently with minimal disruption to the home while delivering immediate improvement in floor stability.
The homeowner now has a properly supported crawl space system designed to protect the structure and prevent future floor movement.

Water Behind the Walls Revealed Bigger Issues—And We Fixed Them

A homeowner in Marinette, Wisconsin reached out after pulling down drywall during a basement update and noticing moisture, wall stains, and growing foundation cracks. With signs of water intrusion and structural concern, they didn’t want to ignore it any longer.

We designed a comprehensive basement waterproofing solution to stop the water before it could cause more damage:

• WaterGuard® interior drainage system was installed to collect water from the base of the foundation walls and direct it safely to a sump system.

• Bleeder lines were used to relieve hydrostatic pressure and allow lateral water from specific problem areas to drain properly.

• A new SuperSump™ Plus was installed to handle peak water loads, and we added IceGuard® protection to ensure drainage continues even in freezing temps.

This solution not only addressed the active water problem but helped mitigate future foundation damage by reducing pressure behind the walls. Now, the homeowner can confidently move forward with finishing their basement—knowing it’s protected for the long haul.

When a homeowner in Marinette, WI, found themselves battling a persistently wet and leaking basement, they knew they needed professional help. That's where we, Sure-Dry, entered the picture, charged with the mission of transforming their damp basement into a dry, safe space. The customer reached out to our Customer Care team, troubled by the water damage and seeking a lasting solution. Responsive and understanding, we set up a home inspection promptly to address the issue head-on. Upon inspection, it was clear that the basement's water woes were no match for a surface-level fix. Our System Design Specialist meticulously examined the area, laying out a comprehensive plan to not just fight the existing problem but to ensure it wouldn't recur. The proposed solution? Our reliable WaterGuard system combined with the ever-effective CleanSpace liner. WaterGuard is designed to channel water efficiently away from the basement, while CleanSpace acts as a barrier, keeping moisture out. Our experienced production team swung into action, showcasing their skill and attention to detail. They installed the specified systems efficiently, ensuring minimal disruption to the homeowner's daily life. Throughout, our team kept the workspace tidy, demonstrating our commitment to a remarkable customer experience. The outcome? A dry, approachable basement, free from the threats of mold and water damage. The homeowner now enjoys a peace of mind, knowing their basement is guarded by Sure-Dry's solutions. By fixing a longstanding problem, we've not only restored a vital part of their home but also their confidence in it staying dry and secure for years to come.

When a Marinette, Wisconsin homeowner reached out to us with concerns about their sinking concrete step and years-long battle with cracks, we knew instantly that we had the tools and expertise to provide a lasting solution. The troublesome step not only posed a safety hazard but detracted from the home’s aesthetic appeal and overall value. Understanding the need for a robust and reliable fix, we embarked on a mission to restore the homeowner’s peace of mind and property integrity. After the homeowner’s initial contact, our dedicated Customer Care team promptly scheduled a comprehensive home inspection. Our System Design Specialist, Kelly, visited the residence, thoroughly examining the concrete issues. We diagnosed the causes of the sinking and cracking, which led to the recommendation of PolyLevel® and NexusPro® installations as the most effective treatment. These state-of-the-art products were chosen specifically for their ability to not only efficiently address the immediate concerns but also prevent future problems. The installation involved our skilled foreman, Sabin, and a team of installers who meticulously raised the sinking step back to its proper level with PolyLevel®, a durable, high-quality polyurethane foam designed to support and lift concrete. Next, to ensure the cracks would no longer be issues, NexusPro®, a silicone-based sealant that resists weathering far better than traditional materials, was applied to seal the cracks and prevent water from causing further damage. The result? No more sinking steps or unsightly cracks. The safety, appearance, and value of the homeowner’s property were enhanced, marking another successful completion on our part. This project not only resolved the homeowner’s issue but also mirror our mission to deliver a remarkable customer experience by providing a reliable and long-lasting solution. 

Recently in Marinette, WI, we had the pleasure of helping a homeowner who was facing a bit of a challenge with their home's entryway. They reached out to us at Sure-Dry because accessing their front step had become increasingly difficult due to uneven and sunken concrete. Ensuring ease of access and safety for their family and guests was their top priority, and they needed a reliable and lasting solution to this frustrating issue. Upon the homeowner contacting our friendly Customer Care team, we arranged a home inspection to get to the root of the problem. One of our skilled System Design Specialists visited the home, performing a thorough inspection of the entryway. It was clear that the concrete slabs had shifted over time, which is not uncommon. But no job is too big or too small for us. We recommended a two-fold approach using PolyLevel and NexusPro for an efficient and effective repair. PolyLevel, a superior foam injection system, would lift and level the concrete slabs to their original position, while NexusPro would seal any joints and cracks, preventing future water intrusion and damage. Our dedicated production foreman, Sabin, and his team got to work, executing the plan flawlessly. The PolyLevel injection raised the entryway to its appropriate level almost immediately, impressing the homeowner with its effectiveness. Following this, NexusPro was applied, giving the concrete a clean, finished look, and ensuring durability for years to come. The outcome was exactly what the homeowner had hoped for - easy and safe access to their front step. Not only did the repairs enhance the functionality of their entryway, but they also improved the curb appeal of their home. The homeowner was overjoyed with the quick and stunning transformation, glad they chose Sure-Dry!

These homeowners in Marinette were fed up with the moisture and water issues they were continually having in their basement and called Sure-Dry to help! We installed a combination of WaterGuard, CleanSpace Wall Vapor Barrier, and a TripleSafe Sump Pump to effectively collect the water entering their basement and safely carry it back outside. The homeowner's were thrilled that they now had a comfortable and dry basement and would no longer have to worry about water!

Many homes are built monolithic on a foundation that comes with the floor and footing as one piece. This was the case For homeowners in Marinette, WI .

If there is a water problem, it can be very difficult to jackhammer into the concrete which is why we use DryTrak. DryTrak's drain is secured to the floor with only a slight opening at the top to allow water to flow in. The water then is carried to the sump pump to be discharged out.

With a new water system installed in their basement, these homeowners can safely put their belongings down there knowing they won't get destroyed!