Sure-Dry serving Little Chute, WI

During the inspection, the System Design Specialist evaluated the basement layout, window location, and exterior grading to determine the best placement for a compliant egress solution. Measurements were taken to ensure the window opening would meet local code requirements for clear opening size, sill height, and accessibility. Based on these findings, an egress window system was recommended to improve safety and meet code standards without disrupting the existing finished space.

Installation involved carefully cutting the foundation wall, installing the new window and window well, and integrating proper drainage to prevent water intrusion. The work was completed efficiently with attention to structural integrity and exterior appearance.
The homeowner now has a basement that meets safety requirements and adds functional value to the home.

During the inspection, the System Design Specialist identified soil settlement beneath the driveway slabs as the primary cause of the uneven surface. Elevation measurements were taken to determine the amount of lift required, and crack patterns were evaluated to confirm areas vulnerable to moisture intrusion. Based on slab condition and site access, PolyLevel® was selected to raise and stabilize the concrete while preserving the existing driveway.

Installation involved injecting the high-density polyurethane material beneath the affected slabs to achieve precise lift and stabilization. After leveling was complete, NexusPro® was applied to seal joints and cracks, helping block surface water from reaching the soil below. The work was completed quickly with minimal disruption and immediate usability of the driveway.
The homeowner now has a restored concrete driveway designed to remain level and protected through Wisconsin’s changing seasons.

During the inspection, the System Design Specialist identified groundwater seepage occurring at the foundation perimeter that was not being captured by the existing sump pump setup. Drainage pathways, footing conditions, and discharge options were evaluated to design a solution that would support a finished basement environment. Based on the site conditions and remodeling plans, WaterGuard® was selected to manage perimeter water intrusion, combined with a SuperSump® to provide reliable, high-capacity pumping.

Installation included placing the interior drainage system along the foundation perimeter and integrating it directly into the new sump system for efficient water removal. The work was completed with minimal disruption to the home while delivering immediate and long-term protection.
The homeowner now has a waterproofed basement system designed to support a finished space and provide lasting peace of mind.

During the evaluation, the System Design Specialist identified inward wall movement contributing to reduced wall stiffness and improper load transfer affecting the floors above. Measurements were taken to verify wall deflection and installation clearances, ensuring the reinforcement system could be properly anchored to the framing structure. Based on the wall condition and basement layout, PowerBrace™ was selected as the most effective solution to stabilize the foundation walls and support long-term structural integrity.

Installation involved securing each steel beam to the basement slab and fastening it to the floor framing above to create a permanent wall stabilization system. The work was completed efficiently with minimal disruption to the home while providing immediate structural stabilization. The system also allows for optional future tightening if wall adjustment becomes possible over time.
The homeowner now has a reinforced foundation designed to protect their home and reduce the risk of continued floor sagging.

Living in Little Chute, WI, facing a flooded basement is nothing short of a nightmare for any homeowner. Imagine walking down to your basement, only to find it soaking wet – not an ideal way to spend your day. That’s exactly what one local homeowner experienced, prompting a quick call to us at Sure-Dry. Upon receiving the call, our Customer Care team moved swiftly, scheduling an inspection to understand the root of the problem. Our System Design Specialist was onsite, armed with expertise and empathy, eager to provide a reliable and lasting solution. The diagnosis? An inadequately waterproofed basement, desperately needing our touch. We recommended the installation of WaterGuard, an innovative product designed with these exact challenges in mind. This system is engineered to efficiently channel water away from your basement, preventing any future unwanted pools of water and creating a reliably dry space. Our production team, consisting of a skilled foreman and dedicated installers, worked meticulously to ensure the installation was smooth and disruption-free. They went above and beyond, keeping the space neat and tidy, respecting the homeowner's property as if it were their own. Post-installation, the change was monumental. No longer did the homeowner fear rain in the forecast; their basement remains dry, transforming previously unusable space into an area ripe with potential. They expressed immense gratitude, thrilled with the peace of mind our solution provided. In Little Chute, WI, we at Sure-Dry are proving that the nightmare of a flooded basement can quickly become a thing of the past. By choosing us, homeowners rest assured, knowing our blend of expertise and innovative solutions like WaterGuard keep their basements dry and their minds at peace.

Homeowners in Little Chute, WI gave us a call about fixing the dirty unfinished look on their concrete walls. They wanted to see what we had to offer to fix their damaged walls. 

Right away we knew we had the perfect solution for their home's needs. We encapsulated their crawlspace in CleanSpace Wall System. This system not only makes the walls have a cleaner, brighter, new look, it also blocks water out from seeping back through again. 

These homeowners are more than happy to know their walls are in better shape than they have ever been in!