Ringle, WI's Dependable Contractor for Basement Waterproofing & Foundation Repair

During inspection, we measured up to two inches of settlement at the garage apron and traced the main crack through the center of the slab. After confirming sound subgrade conditions, small ⅜-inch ports were drilled and PolyLevel® foam was injected in controlled lifts until the slab returned to proper height and alignment with the garage floor.

With the voids filled and structural support restored, the team cleaned and sealed the primary crack and joints using NexusPro® flexible sealant to prevent future water entry and erosion. The repair provided immediate improvement in grade and function—delivering a smooth, sealed approach ready for same-day use.

During inspection, we identified active seepage at multiple wall-floor seams and an undersized sump pit incapable of managing inflow during storms. The team began by removing a narrow section of the concrete floor and installing WaterGuard® drainage channels around the perimeter footing to intercept and direct groundwater.

The new TripleSafe® sump system was set in a sealed liner with three pump stages—primary, secondary, and battery backup—to ensure continuous operation in any condition. Finally, a Sedona™ high-efficiency dehumidifier was installed and ducted for even air circulation, maintaining a consistent humidity level below 55%. With these systems integrated, the basement now stays dry, odor-free, and protected against both water intrusion and moisture-related air quality issues.

During inspection, we mapped deflection across all foundation walls and recorded the crack pattern to determine anchor spacing. With clear exterior access available along two wall spans, we excavated small, tidy exterior pits and set GeoLock® anchors beyond the active soil zone. Inside, heavy-gauge steel wall plates were mounted and tensioned against the concrete surface to apply lateral resistance.

Once aligned, each anchor was torque-tested to confirm holding strength and adjusted to achieve uniform pressure. The installation restored immediate stability and established a maintenance path for future tightening—ensuring long-term correction without major excavation or interior reconstruction.

Your home is a system, and every part of that system plays a role that affects the rest of the structure. If your crawl space begins to rot, grow mold, or experience structural problems, this will extend to every part of your home. 

This was the case for the crawl space of this home in Ringle, WI.  Moisture was getting into the crawl space, creating mold and damaging the wood structures within. 

To solve this home's crawl space problem, Sure-Dry Basement Systems installed their CleanSpace® Crawl Space Vapor Barrier System.  This durable, bright white crawl space liner installs on the walls and floors, preventing water vapor and humidity from passing through. By keeping your crawl space dry, you protect your structure and insulation from mold and rot.

With a 25-year warranty against rips and tears, this durable 20-mil poly-reinforced crawl space liner converts your crawl space into a usable storage area. And with its mold-resistant additive "UltraFresh", CleanSpace® will never support mildew or mold growth on its surface.

If you are having issues with your home's crawl space, contact Sure-Dry today for a free estimate!