Laona, WI's Dependable Contractor for Basement Waterproofing & Foundation Repair

During the inspection, the Sure-Dry System Design Specialist documented the water patterns along the cove joint, evaluated the existing sump pit and pump, and measured wall temperatures to understand heat loss and condensation behavior. The evidence confirmed that hydrostatic pressure beneath the slab was forcing groundwater into the basement while uninsulated concrete walls were contributing to moisture and comfort issues. To provide a basement waterproofing Laona WI solution that addressed both water and wall performance, the specialist designed a continuous WaterGuard® interior drainage system along the problem walls, specified a TripleSafe® sump pump upgrade for redundancy and reliability, and recommended Basement to Beautiful™ wall panels to improve comfort and manage wall-side moisture.

On installation day, the crew saw-cut and removed a narrow strip of concrete at the slab edge, installed the WaterGuard interior drainage channel on a drainage stone bed pitched toward the new sump basin, and connected it to the TripleSafe pump system with a properly routed discharge line to daylight. After restoring the concrete over the trench, the team prepared the foundation walls and installed Basement to Beautiful panels to create an insulated, moisture-aware wall surface that integrates with the drainage system. The result is a coordinated wet basement repair and musty basement odor solution Wisconsin homeowners can depend on—giving this Laona homeowner a dry, comfortable basement with systems in place to support future finishing and long-term protection.

During inspection, the crawl space showed signs of elevated moisture, soft soil, and deteriorated insulation. The inspector recommended full encapsulation with the CleanSpace® system to isolate the area from ground moisture and prevent humid air from circulating into the home.

Installation began with grading and preparing the surface before laying drainage matting for proper water movement. The CleanSpace liner was then fitted along the floor and walls, with all seams sealed and edges mechanically fastened for durability. The transformation resulted in a bright, clean, and dry crawl space that will protect the home from moisture-related damage and improve indoor air quality for years to come.

Inspection revealed several sections of the garage slab had dropped unevenly due to soil compaction loss and moisture intrusion beneath the concrete. The inspector recommended a PolyLevel® lift and NexusPro® joint sealing to restore the surface without the cost and disruption of full replacement.

The installation team drilled small injection ports and injected lightweight, expanding PolyLevel foam to lift each slab with precision. After achieving a uniform surface, NexusPro sealant was applied to fill joints and prevent water penetration. The result is a clean, stable, and long-lasting repair that improves both appearance and function of the garage floor.

During inspection, the basement wall was found to have vertical cracking and slight inward deflection from lateral soil pressure. The inspector recommended CarbonArmor® as a low-profile reinforcement solution ideal for tight spaces and minimal disruption. This system uses carbon fiber technology to strengthen the wall by distributing stress evenly across the surface.

Installation involved preparing and cleaning the wall, applying industrial epoxy, and securing each CarbonArmor strap in place from top to bottom. Once cured, the straps created a continuous, high-strength bond that restored the wall’s stability without altering the basement’s usable space. The result is a clean, permanent solution that protects the home from further structural damage.

These homeowners were having major water issues in their basement.  Water was finding its way in through the basement walls, and pooling on the basement floor, damaging the items being stored down there.  The only piece of water control these homeowners had was a pit in their basement, which was proving to be useless against the amount of water coming in.  

Sure-Dry Basement Systems restored their piece of mind by installing a comprehensive system that provided them with complete water protection.

To collect the water coming into through the basement walls, Sure-Dry Basement Systems installed their WaterGuard® system.  The WaterGuard® system collects water that seeps through basement walls and drains it to your sump pump. The system installs quickly and has a clean finished appearance, meaning you don't have to worry about having an unsightly drain around the basement.

To drain the water being collected by the WaterGuard, Sure-Dry then replaced their pit with their SuperSump® Premier Pump System. It is engineered to help keep the basement dry and healthy for extended periods of time, even in times of heavy water intrusion. The SuperSump® includes a powerful Zoeller® ⅓ horsepower cast-iron sump pump, capable of pumping 2,220 gallons of water per hour at an 8-foot head out of your basement.

To create a vapor barrier between the basement walls and the house and to catch the water coming in from the walls and direct it to the WaterGuard System, Sure-Dry installed their BrightWall® Wall Panel System. BrightWall® is a rigid plastic sheeting that's attached to your basement wall by drilled-in plastic fasteners. Its bright white color maximizes the available light in your basement, creating a cheerful, clean-looking space.  BrightWall® is 100% waterproof and washable, and it creates a vapor barrier on your basement walls to block out water vapor and humidity. This ensures that you won't have to worry about mold growth or rot.

If you are experiencing water problems in your basement, contact Sure-Dry today for a free estimate!